Front Springs, Approx. 25mm Lowering, Versys 650

【HYPERPRO Hyperpro 22071960 Front Spring Lowdown Approx. 25mm Versys 650 Suspension Fork Spring】
■Front Spring
Hyperpro's unique low-down spring lowers vehicle height through rate change and oil level adjustment, without significantly altering the free length of the spring.
Enjoy the smooth ride of the constant rising rate, which flexibly absorbs shocks and holds firm deeper into the stroke.
The front spring comes with the necessary amount of fork oil.
Compatible Models
KAWASAKI VERSYS650(ABS) '15～'21
Specifications
Lowdown: Approx. 25mm
Spring Part Number: 1616
Fork Oil Viscosity/Oil Level: SAE15/L 180mm, R 60mm
Preload Adjustment: 5 turns
Sag Value: 55mm
Compression Adjustment: None
Rebound Adjustment: 1.25 turns back
Setting Notes: Oil level should be measured with the spring removed / Spring on left side only / Protrusion amount 20mm.
*Spring is on the left side only.
*When using the side stand, stop on a flat surface with the bike in first gear. (Due to the lowdown, the bike will be more upright than normal.)
*Vehicle balance changes significantly after installation. Always adjust the front and rear settings before riding.
*Lowdown parts are considered designated parts, so structural modification procedures are not required.
*For lowdowns of 30mm or more, a short side stand may be required depending on the vehicle's condition. For models with preload adjustment, adjust the settings while ensuring the side stand can be used at the desired lowdown amount.
*Images are for illustration purposes only, and the design and specifications of the products shown are subject to change without notice. Please be aware of this.