Front springs, lowered by approximately 20mm, Ninja 1000

[HYPERPRO 22072060 Front Spring Lowdown approx. 20mm Ninja 1000 Suspension Fork Spring]
■Front Spring
Hyperpro's unique lowdown spring that lowers vehicle height by changing the spring rate and oil level without significantly altering the free length of the spring.
Enjoy the smooth ride of the constant rising rate that gently absorbs impacts and provides strong support deeper in the stroke.
The front spring comes with the necessary amount of fork oil.
Compatible models
KAWASAKI Ninja1000 '14～'19
KAWASAKI Ninja1000(ABS) '14～'19
KAWASAKI Ninja1000 SX '20～'23
Specifications
Lowdown: approx. 20mm
Spring part number: 621
Fork oil viscosity/level: SAE10/100mm
Preload adjustment: 0 turns
Sag value: 40mm
Compression adjustment: 0.5 turns out
Rebound adjustment: 1 turn out
Setting remarks: Assemble with the tapered end facing up / Use the genuine spacer.
*When using the side stand, park on a flat surface in first gear. (The vehicle will be more upright than normal due to the lowdown.)
*The vehicle's balance will change significantly after installation. Always perform front and rear adjustments before riding.
*Lowdown parts are considered designated parts, so no structural modification procedures are required.
*For lowdowns of 30mm or more, a short side stand may be necessary depending on the vehicle's condition. For models with preload adjustment, adjust the setting while ensuring the side stand can be used at the lowered height.
*The image is for illustration purposes only, and the design and specifications of the products shown are subject to change without notice. Please understand.