Front Spring Lowering approximately 25mm Z900

【HYPERPRO 22072100 Front Spring, Low Down Approx. 25mm, Z900 Suspension Fork Spring】
■Front Spring
Hyperpro's unique low-down spring lowers the vehicle height by changing the spring rate and adjusting the oil level, without significantly altering the free length of the spring.
Enjoy the smooth ride of the constant-rising rate, which absorbs impacts flexibly and provides strong support deeper into the travel.
The front spring includes the necessary amount of fork oil.
Compatible models
KAWASAKI Z900 '18-'22
Specifications
Low down: Approx. 25mm
Spring material number: 1211
Fork oil grade/oil level: SAE15/120mm
Preload adjustment: 0 turns
Sag value: 40mm
Compression adjustment: No adjustment
Rebound adjustment: 5 clicks out
Setting notes: Extension 10mm / Measure oil level in right fork with spacer under spring / Special tool required for right fork (HP-T62).
*When using the side stand, park on a flat surface in first gear. (The vehicle will be more upright than normal due to the low-down setup.)
*The vehicle balance changes significantly after installation. Always adjust the front and rear settings before riding.
*Low-down parts are considered specified parts, so no structural modification procedures are required.
*For low-downs of 30mm or more, a short side stand may be required depending on the vehicle's condition. For models with preload adjustment, adjust the setting while ensuring the side stand can be used with the lowered height.
*Images are for illustration purposes only, and the design and specifications of the products shown are subject to change without notice. Please understand.