Front springs, approximately 25mm lower, Ninja 650

【HYPERPRO 22073150 Front Spring, Low-down approx. 25mm, Ninja 650 Suspension Fork Spring】
■Front Spring
A Hyperpro-exclusive low-down spring that lowers the ride height by changing the rate and adjusting the oil level without significantly altering the free length of the spring.
Enjoy a smooth ride with constant rising rate that flexibly absorbs shocks and firmly supports at the end of the stroke.
The front spring comes with the necessary amount of fork oil.
Compatible models
KAWASAKI Ninja650(ABS) '17-'22
Specifications
Low-down: Approx. 25mm
Spring material number: 1043
Fork oil viscosity/oil level: SAE15/120mm
Preload adjustment: None
Sag value: 35mm
Compression adjustment: None
Rebound adjustment: None
Setting remarks: Fork protrusion 15mm (OEM 5mm).
*When using the side stand, park the vehicle on a flat surface with the gear in first. (The vehicle will be more upright than stock due to the low-down)
*After installation, the vehicle balance will change significantly. Always set up the front and rear suspension before riding.
*Low-down parts are considered designated parts, so no structural modification procedures are required.
*For low-downs of 30mm or more, a short side stand may be necessary depending on the vehicle's condition. For models with preload adjustment, adjust the low-down amount so that the side stand can be used while performing the settings.
*The image is for illustration purposes only, and the design and specifications of the products shown may change without prior notice. Please understand.