Front Spring Lowered by Approx. 10mm Ninja 250SL Z250SL

[HYPERPRO 22075090 Front Spring Lowering Approx. 10mm Ninja 250SL Z250SL Suspension Fork Spring]
■Front Spring
A lowering spring unique to Hyperpro that lowers the vehicle height by changing the spring rate and adjusting the oil level, without significantly changing the free length of the spring.
Enjoy the smooth ride of the constant rising rate, which flexibly absorbs shocks and maintains stability in deeper compression.
The front spring comes with the necessary amount of fork oil.
Compatible models
KAWASAKI Ninja250SL '15-'16
KAWASAKI Z250SL ABS '16-'17
Specifications
Lowering: Approx. 10mm
Spring part number: 1628
Fork oil viscosity/oil level: SAE15/160mm
Preload adjustment: No adjustment
Sag value: 22mm
Compression adjustment: No adjustment
Rebound adjustment: No adjustment
Setting remarks: Fork protrusion 8mm.
*When using the side stand, park on a flat surface with the bike in first gear. (Due to the lowering, the vehicle will be more upright than normal.)
*The vehicle's balance will change significantly after installation. Always perform front and rear adjustments before riding.
*Lowering parts are designated components, so structural modification procedures are not required.
*For lowering of 30mm or more, a short side stand may be required depending on the vehicle's condition. For models with preload adjustment, set the lowering amount to allow the use of the side stand.
*The image is for illustration purposes only. The design and specifications of the products shown are subject to change without notice. Please be aware of this.