Rear spring, approximately 10mm lower; Ninja 250SL, Z250SL

【HYPERPRO Hyperpro 22075091 Rear Spring Lowdown approx. 10mm Ninja250SL Z250SL Suspension】
■Rear Spring
Hyperpro's unique lowdown spring, which lowers the ride height by changing the rate and adjusting the oil level without significantly altering the free length of the spring.
Enjoy the smooth ride of the constant rising rate, which softly absorbs shocks and firmly supports at the deeper end.
Front springs come with the necessary amount of fork oil.
Compatible models
KAWASAKI Ninja250SL '15-'16
KAWASAKI Z250SL ABS '16-'17
Specifications
Lowdown: approx. 10mm
Spring material number: 1497
Preload adjustment: POS 2
Sag value: 24mm
Compression adjustment: None
Rebound adjustment: None.
*When using the side stand, park on a flat surface with the bike in first gear. (The bike will be more upright than normal due to the lowdown.)
*The vehicle balance changes significantly after installation. Always adjust the front and rear settings before riding.
*Lowdown parts are considered specified parts, so there is no need for structural modification procedures.
*For lowdowns of 30mm or more, a shorter side stand may be required depending on the vehicle's condition. For models with preload adjustment, adjust the settings to a lowdown amount that allows the side stand to be used.
*The image is for illustration purposes only, and the design and specifications of the products shown are subject to change without notice. Please understand.