Front Springs Lowering Approx. 30mm Ninja 250/400

【HYPERPRO 22075190 Front Spring Lowering approx. 30mm for Ninja 250/400 Suspension Fork Spring】
■Front Spring
Hyperpro's unique lowering spring lowers the ride height by changing the rate and adjusting the oil level, without significantly altering the free length of the spring.
Enjoy the smooth ride of a constant rising rate that gently absorbs impacts and holds steady at its deepest point.
The front spring comes with the necessary amount of fork oil.
Compatible models
KAWASAKI Ninja250(ABS) '18～'22
KAWASAKI Ninja400(ABS) '18～'22
Specifications
Lowering: Approx. 30mm
Spring part number: 1712
Fork oil grade/oil level: SAE20/120mm
Preload adjustment: No adjustment
Sag value: 44mm
Compression adjustment: No adjustment
Rebound adjustment: No adjustment
Setting remarks: This spring is 10mm shorter than the stock spring. Install with 10mm fork protrusion.
*When using the side stand, park on a flat surface with the transmission in first gear. (The vehicle will be more upright than normal due to the lowering.)
*After installation, the vehicle's balance will change significantly. Always adjust the front and rear settings before riding.
*Lowering parts are designated components, so no structural modification procedures are required.
*For lowering of 30mm or more, a short side stand may be required depending on the vehicle's condition. For models with preload adjustment, set the side stand to a lowering amount that allows it to be used.
*Images are for illustration purposes only, and the design and specifications of the products shown may change without notice. Thank you for your understanding.