Front spring lowering approx. 40mm F800S F800ST

【HYPERPRO 22091670 Front Spring Lowdown approx. 40mm F800S F800ST Suspension Fork Spring】
■Front Spring
These Hyperpro lowdown springs lower the ride height through a change in spring rate and oil level adjustment, without significantly altering the free length of the spring.
Enjoy the smooth ride of Constant Rising Rate springs, which gently absorb shocks and maintain stiffness under heavy loads.
The front springs come with the necessary amount of fork oil.
Compatible models
BMW F800S '05-'12
BMW F800ST '05-'12
Specifications
Lowdown: approx. 40mm
Spring part number: 1010
Fork oil grade/level: SAE15/170mm
Preload adjustment: Not adjustable
Sag value: 40mm
Compression adjustment: Not adjustable
Rebound adjustment: Not adjustable
Setting notes: Install the forks with a 10mm extension.
*When using the side stand, park on a flat surface in first gear. (The bike will be more upright than normal due to the lowdown setup.)
*After installation, the vehicle's balance will change significantly. Always adjust the front and rear settings before riding.
*Lowdown parts are considered specified parts, so no structural modification procedures are required.
*For lowdowns of 30mm or more, a shorter side stand may be necessary depending on the vehicle's condition. For models with preload adjustment, adjust the settings while ensuring the side stand can be used at the desired lowdown amount.
*Images are for illustration purposes only, and the design and specifications of the products shown may change without prior notice. Thank you for your understanding.