Rear spring, lowering by approx. 25mm, XB12X

【HYPERPRO 22091761 Rear Spring Lowdown Approx. 25mm XB12X Suspension】
■Rear Spring
A Hyperpro exclusive lowdown spring that lowers the vehicle height by changing the spring rate and adjusting the oil level, without significantly altering the free length of the spring.
Enjoy the smooth ride of the constant rising rate, which flexibly absorbs shocks and firmly supports the bike deeper into its travel.
Compatible models
BUELL XB12X ULYSSES '05-'07
Specifications
Lowdown: Approx. 25mm
Spring material number: 1227
Preload adjustment: 0-10 clicks
Sag value: 40mm
Compression adjustment: 1.5 turns out (+/- 0.5)
Rebound adjustment: 0.5 turns out (+/- 0.25).
*When using the side stand, park on a flat surface in first gear. (The bike will be more upright than with the standard ride height due to the lowdown.)
*After installation, the vehicle's balance will change significantly. Always adjust the front and rear settings before riding.
*Lowdown parts are considered designated parts, so no structural modification procedures are required.
*For lowdowns of 30mm or more, a short side stand may be required depending on the vehicle's condition. For models with adjustable preload, set the preload while adjusting to a lowdown amount that allows the side stand to be used.
*Images are for illustration purposes only, and the design and specifications of the products shown are subject to change without notice. Please be aware of this.