Rear spring, approximately 40mm lower, Speed Triple 1050

【HYPERPRO Hyperpro 22091781 Rear Spring Lowdown Approx. 40mm Speed Triple 1050 Suspension】
■Rear Spring
Hyperpro's unique lowdown spring lowers the ride height by changing the spring rate and oil level adjustment without significantly altering the free length of the spring.
Enjoy the smooth ride of a constant rising rate that gently absorbs impacts and provides firm support when pushed hard.
Compatible models
TRIUMPH SPEED TRIPLE 1050 '05-'10
Specifications
Lowdown: approx. 40mm
Spring Part Number: 1101
Preload Adjustment: 2-3mm
Sag Value: 40-50mm
Compression Adjustment: 2 turns (+/-0.5)
Rebound Adjustment: 1.5 turns (+/-0.5)
*When using the side stand, park the vehicle on a flat surface in first gear. (Due to the lowdown, the vehicle will stand more upright than with the normal suspension.)
*After installation, the vehicle's balance will change significantly. Always adjust the front and rear settings before riding.
*Lowdown parts are considered designated parts, so no structural modification procedures are required.
*For lowdowns of 30mm or more, a short side stand may be required depending on the vehicle's condition. For models with preload adjustment, adjust the settings to a lowdown amount that allows the side stand to be used.
*The image is for illustration purposes only, and the design and specifications of the products shown are subject to change without prior notice. Please understand.