Rear Spring Lowering approx. 30mm R1200GS

[HYPERPRO 22091901 Rear Spring Lowdown Approx. 30mm R1200GS Suspension]
■Rear Spring
A lowdown spring unique to Hyperpro that lowers the ride height by changing the spring rate and adjusting the oil level without significantly altering the free length of the spring.
Enjoy the smooth ride of Constant Rising Rate, which flexibly absorbs shocks and holds firm at its limit.
Compatible models
BMW R1200GS '04-'05
Specifications
Lowdown: Approx. 30mm
Spring Part Number: 1267
Preload Adjustment: 0 clicks
Sag Value: 45mm
Compression Adjustment: None
Rebound Adjustment: 1.5 turns out
Setup Notes: Install with the smaller inner diameter facing up.
*When using the side stand, park on a flat surface with the bike in first gear. (The bike will stand more upright than stock due to the lowdown.)
*The vehicle balance changes significantly after installation. Please adjust the front and rear settings before riding.
*Lowdown parts are considered designated components, so no structural modification procedures are required.
*For lowdowns of 30mm or more, a short side stand may be necessary depending on the vehicle's condition. For models with adjustable preload, please adjust the preload to a lowdown amount that allows the side stand to be used.
*Images are for illustration purposes only, and the design and specifications of the products shown may change without prior notice. Thank you for your understanding.