Rear Spring Lowering approx. 30mm R1150GS

[HYPERPRO 22091911 Rear Spring Lowering approx. 30mm R1150GS Suspension]
■Rear Spring
A lowering spring unique to Hyperpro that lowers the ride height by changing the rate and oil level adjustment, without significantly altering the free length of the spring.
Enjoy a smooth ride with the constant rising rate, which softly absorbs shocks and firmly supports the bike in deeper travel.
Compatible models
BMW R1150GS '99-'03
Specifications
Lowering: approx. 30mm
Spring part number: 1317
Preload adjustment: 0-10 clicks
Sag value: 45-50mm
Compression adjustment: None
Rebound adjustment: 1-2 turns out.
*When using the side stand, park on a flat surface with the bike in first gear. (The bike will be more upright than with the standard suspension due to the lowering)
*The vehicle balance changes significantly after installation. Always adjust the front and rear settings before riding.
*Lowering parts are considered designated parts, so no structural modification procedures are required.
*For lowering of 30mm or more, a shorter side stand may be necessary depending on the vehicle's condition. For models with preload adjustment, set the adjustment to a lowering amount that allows the side stand to be used.
*The image is for illustration purposes only. The design and specifications of the products shown are subject to change without notice. Thank you for your understanding.