Front springs, approx. 30mm lowering for R1150GS

【HYPERPRO Hyperpro 22091920 Front Spring Lowdown approx. 30mm R1150GS Suspension Fork Spring】
■Front Spring
These Hyperpro lowdown springs lower the vehicle height by changing the spring rate and adjusting the oil level, without significantly altering the free length of the spring.
Enjoy a smooth ride with the constant rising rate that flexibly absorbs shocks and firmly holds up at deeper compression.
Front springs include the required amount of fork oil.
Compatible models
BMW R1150GS ADVENTURE '02-'03
Specifications
Lowdown: approx. 30mm
Spring part number: 1341
Fork oil grade/oil level: NO OIL/--
Preload adjustment: 1st-2nd stage
Sag value: 60-70mm
Compression adjustment: None
Rebound adjustment: None.
*When using the side stand, park on a flat surface with the bike in first gear. (Due to the lowdown, the motorcycle will stand more upright than with the standard setup.)
*After installation, the vehicle's balance will change significantly. Be sure to adjust the front and rear settings before riding.
*Lowdown parts are considered designated parts, so structural modification procedures are not required.
*For lowdowns of 30mm or more, a short side stand may be necessary depending on the vehicle's condition. For models with adjustable preload, please adjust the setting to a lowdown amount that allows the side stand to be used.
*The image is for illustrative purposes only, and the design and specifications of the products shown may change without notice. Thank you for your understanding.