Front Spring Lowering approx. 30mm R1100GS

[HYPERPRO 22091930 Front Spring Lowdown approx. 30mm R1100GS Suspension Fork Spring]
■Front Spring
HYPERPRO's unique lowdown springs lower the vehicle height by changing the spring rate and oil level, without significantly altering the free length of the spring.
Enjoy the smooth ride of the constant rising rate, which absorbs impacts flexibly and provides firm support when heavily loaded.
Front springs come with the necessary amount of fork oil.
Compatible models
BMW R1100GS '94-'98
Specifications
Lowdown: approx. 30mm
Spring Part Number: 1316
Fork Oil Viscosity/Oil Level: NO OIL/--
Preload Adjustment: 1st-2nd stage
Sag Value: 50mm
Compression Adjustment: None
Rebound Adjustment: None.
*When using the side stand, park on a flat surface with the bike in first gear. (The bike will be more upright than normal due to the lowdown.)
*After installation, the balance of the vehicle will change significantly. Always adjust the front and rear settings before riding.
*Lowdown parts are considered designated parts, so no structural modification procedures are required.
*For lowdowns of 30mm or more, a short side stand may be required depending on the condition of the vehicle. For models with preload adjustment, please set the preload to a lowdown amount that allows the side stand to be used.
*The image is for illustrative purposes only, and the design and specifications of the products shown are subject to change without notice. Please be aware.