Front springs lowered approx. 25mm K1100LT

【HYPERPRO 22091960 Front Spring Lowdown approx. 25mm K1100LT Suspension Fork Spring】
■Front Spring
This is a unique lowdown spring from Hyperpro that lowers the vehicle height by changing the spring rate and oil level adjustment, without significantly altering the free length of the spring.
Enjoy a smooth ride with a constant rising rate that gently absorbs impacts and provides firm support deeper in the stroke.
The front spring comes with the necessary amount of fork oil.
Compatible models
BMW K1100LT '92-'98
Specifications
Lowdown: Approx. 25mm
Spring part number: 1332
Fork oil grade/oil level: SAE15/140mm
Preload adjustment: No adjustment
Sag value: 65mm
Compression adjustment: No adjustment
Rebound adjustment: No adjustment.
*When using the side stand, park on a flat surface with the bike in first gear. (Due to the lowdown, the vehicle will be more upright than normal.)
*After installation, the vehicle balance will change significantly. Always adjust the front and rear settings before riding.
*Lowdown parts are designated parts, so structural modification procedures are not required.
*For lowdowns of 30mm or more, a short side stand may be required depending on the vehicle condition. For models with preload adjustment, adjust the preload to a lowdown amount that allows the side stand to be used.
*The image is for illustration purposes only, and the design and specifications of the products shown may change without prior notice. Thank you for your understanding.