Front Spring Lowers approx. 25mm F800GS

【HYPERPRO Hyperpro 22091970 Front Spring Lowering approx. 25mm F800GS Suspension Fork Spring】
■Front Spring
Hyperpro's unique lowering spring reduces vehicle height by changing the rate and adjusting the oil level, without significantly altering the free length of the spring.
Enjoy the smooth ride of the constant rising rate, which absorbs impacts flexibly and provides firm support deeper into the travel.
The front spring includes the necessary amount of fork oil.
Compatible models
BMW F800GS '08-'12
Specifications
Lowering: approx. 25mm
Spring part number: 1426
Fork oil grade/oil level: 2X SAE10/110mm
Preload adjustment: Not adjustable
Sag value: 75mm
Compression adjustment: Not adjustable
Rebound adjustment: Not adjustable
Setting notes: After adding oil, stroke the cartridge and outer tube to bleed air.
*When using the side stand, park on a flat surface with the bike in first gear. (The vehicle will be more upright than normal due to the lowering.)
*The vehicle's balance will change significantly after installation. Always adjust the front and rear settings before riding.
*Lowering parts are considered designated parts, so no structural modification procedures are required.
*For lowering of 30mm or more, a short side stand may be required depending on the vehicle's condition. For models with preload adjustment, set the lowering amount to allow the side stand to be used.
*Images are for illustration purposes only, and the design and specifications of the products shown are subject to change without notice. Please understand.