Front spring Lowering approx. 30mm F700GS

【HYPERPRO Hyperpro 22092390 Front Spring Lowering Approx. 30mm F700GS Suspension Fork Spring】
■Front Spring
Hyperpro's unique lowering spring lowers the vehicle height by changing the rate and adjusting the oil level, without significantly altering the free length of the spring.
Enjoy a smooth ride with the constant rising rate, which gently absorbs shocks and provides firm support deeper in the stroke.
The front spring comes with the necessary amount of fork oil.
Compatible models
BMW F700GS '12-'17 (Not compatible with genuine low-down suspension)
BMW F700GS ESA '12-'17 (Not compatible with genuine low-down suspension)
Specifications
Lowering: Approx. 30mm
Spring component number: 1574
Fork oil viscosity/oil level: SAE10/190mm
Preload adjustment: No adjustment
Sag value: 65mm
Compression adjustment: No adjustment
Rebound adjustment: No adjustment
Setting notes: The genuine preload bush (55mm) should be installed under the spring.
*When using the side stand, park on a flat surface in first gear. (Due to the lowering, the vehicle will be more upright than with the normal ride height.)
*After installation, the vehicle's balance will change significantly. Always adjust the front and rear settings before riding.
*Lowering parts are considered designated parts, so no structural modification procedures are required.
*For lowering of 30mm or more, a shorter side stand may be required depending on the vehicle's condition. For models with adjustable preload, set the preload while adjusting to a lowering amount that allows the side stand to be used.
*Images are for illustration purposes only, and the design and specifications of the products shown may change without prior notice. Please be aware.