Front spring lowering approximately 35mm F800GS

[HYPERPRO 22092410 Front Spring Lowdown approx. 35mm F800GS Suspension Fork Spring]
■Front Spring
This is a low-down spring unique to Hyperpro that lowers the vehicle height by changing the spring rate and oil level without significantly altering the free length of the spring.
Enjoy the smooth ride provided by the constant rising rate, which flexibly absorbs shocks and provides strong support deeper in the stroke.
The front spring comes with the necessary amount of fork oil.
Compatible models
BMW F800GS '13-'18
BMW F800GS ESA '13-'18
BMW F800GS ADVENTURE '13-'00
Specifications
Lowdown: approx. 35mm
Spring material number: 1569
Fork oil viscosity/oil level: 2X SAE10/110mm
Preload adjustment: No adjustment
Sag value: 90mm
Compression adjustment: No adjustment
Rebound adjustment: No adjustment
Setting remarks: Install with forks protruding 5mm.
*When using the side stand, park on a flat surface in first gear. (The vehicle will be more upright than normal due to the lowdown.)
*After installation, the vehicle's balance will change significantly. Be sure to adjust the front and rear settings before riding.
*Lowdown parts are considered specified parts, so structural modification procedures are not required.
*For lowdowns of 30mm or more, a short side stand may be required depending on the vehicle's condition. For models with preload adjustment, adjust the lowdown amount so that the side stand can be used.
*The image is for illustration purposes only, and the design and specifications of the products shown may change without prior notice. Please understand.