Front spring, lowering approx. 20mm F800GT

【HYPERPRO Hyperpro 22092590 Front Spring Lowdown approx. 20mm F800GT Suspension Fork Spring】
■Front Spring
Hyperpro's unique lowdown spring, which lowers the ride height by changing the spring rate and oil level without significantly altering the spring's free length.
Enjoy the smooth ride of the constant rising rate, which softly absorbs shocks and firmly supports the bike deep into its travel.
The front spring comes with the necessary amount of fork oil.
Compatible Models
BMW F800GT '13-'18
BMW F800GT ESA '13-'18
Specifications
Lowdown: approx. 20mm
Spring Material Number: 1165
Fork Oil Viscosity/Oil Level: SAE15/130mm
Preload Adjustment: ESA
Sag Value: 40mm
Compression Adjustment: None
Rebound Adjustment: None
Setting Notes: Extend fork tubes by 15mm.
*When using the side stand, park on a flat surface in first gear. (The bike will be more upright than with the stock setup due to the lowdown.)
*After installation, the bike's balance will change significantly. Always adjust the front and rear settings before riding.
*Lowdown parts are considered designated components, so no structural modification procedures are required.
*For lowdowns of 30mm or more, a short side stand may be necessary depending on the bike's condition. For models with preload adjustment, adjust the setting while ensuring the side stand can be used with the lowered height.
*Images are for illustration purposes only, and the design and specifications of the products shown are subject to change without prior notice. Please understand.