Rear spring, approximately 20mm lowering R1150RT

[HYPERPRO Hyperpro 22092601 Rear Spring Lowering approx. 20mm R1150RT Suspension]
■Rear Spring
Hyperpro's unique lowering springs achieve a lowered ride height by changing the spring rate and adjusting the oil level, without significantly altering the free length of the spring.
Enjoy a smooth ride with constant rising rate that flexibly absorbs shocks and maintains stability deeper into the travel.
Compatible models
BMW R1150RT '00-'06
Specifications
Lowering: approx. 20mm
Spring part number: 1196
Preload adjustment: 0-10 clicks
Sag value: 25mm
Compression adjustment: None
Rebound adjustment: 1-1.5 turns out
*When using the side stand, park on a flat surface in first gear. (Due to the lowering, the bike will be more upright than with the stock setup.)
*The vehicle's balance will change significantly after installation. Always adjust the front and rear settings before riding.
*Lowering parts are designated components, so structural modification procedures are not required.
*For lowering of 30mm or more, a short side stand may be required depending on the vehicle's condition. For models with preload adjustment, adjust the preload to a lowering amount that allows the side stand to be used.
*The image is for illustration purposes only. The design and specifications of the products shown are subject to change without notice. Thank you for your understanding.