Front springs, lowered by approx. 50mm, F800GS

[HYPERPRO 22092920 Front Spring, Low-down approx. 50mm for F800GS Suspension Fork Spring]
■Front Spring
A low-down spring unique to Hyperpro that lowers the vehicle height by changing the spring rate and oil level, without significantly altering the free length of the spring.
Enjoy the smooth ride of the Constant Rising Rate, which absorbs impacts flexibly and provides firm support deeper into the stroke.
The front springs come with the necessary amount of fork oil.
Compatible models
BMW F800GS '13-'18
BMW F800GS ESA '13-'18
BMW F800GS ADVENTURE '13-'00
Specifications
Low-down: Approx. 50mm
Spring material number: 1579
Fork oil grade/oil level: 2X SAE10/100mm
Preload adjustment: None
Sag value: 105mm
Compression adjustment: None
Rebound adjustment: None
Setting remarks: After adding oil, stroke the cartridge and outer tube to remove air. Install with the fork protruding 5mm.
*When using the side stand, park on a flat surface in first gear. (Due to the low-down, the vehicle will be more upright than with standard suspension.)
*The vehicle balance will change significantly after installation. Always adjust the front and rear settings before riding.
*Low-down parts are considered designated parts, so no structural modification procedures are required.
*For low-downs of 30mm or more, a shorter side stand may be required depending on the vehicle's condition. For models with preload adjustment, set the suspension while adjusting to a low-down amount that allows the side stand to be used.
*The images are for illustration purposes only, and the design and specifications of the products shown may change without prior notice. Please understand.