Front spring, low down approx. 25mm R1150RS

【HYPERPRO Hyperpro 22093290 Front Spring Lowering approximately 25mm R1150RS Suspension Fork Spring】
■Front Spring
Hyperpro's unique lowering spring, which lowers the ride height by changing the spring rate and adjusting the oil level without significantly altering the free length of the spring.
Enjoy the smooth ride of the constant rising rate, which softly absorbs shocks and provides firm support when pushed.
The front spring comes with the necessary amount of fork oil.
Compatible models
BMW R1150RS '01-'04
Specifications
Lowering: Approximately 25mm
Spring part number: 1398
Fork oil grade/oil level: NO OIL/-
Preload adjustment: No adjustment
Sag value: 45-50mm
Compression adjustment: No adjustment
Rebound adjustment: 0.5 turns.
*When using the side stand, park on a flat surface with the transmission in first gear. (The vehicle will be more upright than normal due to the lowering)
*The vehicle balance changes significantly after installation. Always adjust the front and rear settings before riding.
*Lowering parts are considered designated parts, so no structural modification procedures are required.
*For lowering of 30mm or more, a short side stand may be required depending on the vehicle's condition. For models with preload adjustment, adjust the setting while ensuring the side stand can be used with the lowered amount.
*Images are for illustration purposes only, and the design and specifications of the products shown are subject to change without notice. Please be aware of this.