Rear springs, approx. 25mm lower R1150RS

【HYPERPRO 22093291 Rear Spring Lowering approx. 25mm R1150RS Suspension】
■Rear Spring
This Hyperpro lowering spring lowers the ride height by changing the spring rate and adjusting the oil level without significantly changing the free length of the spring.
Enjoy the smooth ride of the constant rising rate, which absorbs impacts flexibly and provides firm support when pushed hard.
Compatible models
BMW R1150RS '01-'04
Specifications
Lowering: approx. 25mm
Spring part number: 1312
Preload adjustment: 10 clicks
Sag value: 40mm
Compression adjustment: None
Rebound adjustment: 1-1.5 turns out.
*When using the side stand, park on a flat surface in first gear. (The bike will be more upright than normal due to the lowering.)
*After installation, the balance of the bike will change significantly. Be sure to set up the front and rear suspension before riding.
*Lowering parts are designated components, so no structural modification procedures are required.
*For lowering of 30mm or more, a shorter side stand may be required depending on the condition of the vehicle. For models with adjustable preload, set the preload while adjusting the lowering amount so that the side stand can be used.
*The image is for illustration purposes only, and the design and specifications of the products shown are subject to change without notice. Please understand.