Front spring lowering approx. 25mm R1150R

[HYPERPRO 22093310 Front Spring Lowdown approx. 25mm R1150R Suspension Fork Spring]
■Front Spring
Hyperpro's unique lowdown springs lower the ride height by changing the spring rate and oil level adjustment, without significantly altering the free length of the spring.
Enjoy the smooth ride of Constant Rising Rate, which softly absorbs shocks and provides firm support when heavily loaded.
Front springs come with the necessary amount of fork oil.
Compatible models
BMW R1150R '01-'06
Specifications
Lowdown: approx. 25mm
Spring part number: 1398
Fork oil viscosity/oil level: NO OIL/-
Preload adjustment: No adjustment
Sag value: 45mm
Compression adjustment: No adjustment
Rebound adjustment: No adjustment.
*When using the side stand, park on a flat surface with the transmission in first gear. (The vehicle will be more upright than with the stock setup due to the lowdown.)
*The vehicle balance will change significantly after installation. Always adjust the front and rear settings before riding.
*Lowdown parts are designated parts, so structural modification procedures are not required.
*For lowdowns of 30mm or more, a short side stand may be required depending on the vehicle's condition. For models with preload adjustment, set the lowdown amount to allow the side stand to be used.
*The image is for illustrative purposes only, and the design and specifications of the products shown are subject to change without notice. Please be aware.