Front Spring Lowdown approx. 15mm S1000XR

[HYPERPRO 22093380 Front Spring, Low Down Approx. 15mm, S1000XR Suspension Fork Spring]
■Front Spring
This low-down spring is unique to Hyperpro, lowering the vehicle height by changing the spring rate and adjusting the oil level without significantly altering the free length of the spring.
Enjoy the smooth ride of the constant rising rate, which softly absorbs shocks and maintains stability when compressed.
Front springs come with the necessary amount of fork oil.
Compatible models
BMW S1000XR '15-'19 (ESA)
Specifications
Low down: approx. 15mm
Spring part number: 1665
Fork oil grade/oil level: 2X SAE10/140mm
Preload adjustment: ESA
Sag value: 30mm
Compression adjustment: ESA
Rebound adjustment: ESA
Setting remarks: Fork protrusion 15mm
Accessories: 1.5L oil.
*When using the side stand, park on a flat surface with the bike in first gear. (The vehicle will stand more upright than with the normal suspension due to the low-down)
*After installation, the vehicle balance will change significantly. Always adjust the front and rear settings before riding.
*Low-down parts are considered designated parts, so no procedures for structural changes are required.
*For low-down greater than 30mm, a short side stand may be necessary depending on the vehicle condition. For models with adjustable preload, set the preload while adjusting to a low-down amount that allows the side stand to be used.
*Images are for illustration purposes only, and the design and specifications of the products shown are subject to change without prior notice. Please understand.