Rear spring, approx. 15mm lowering, S1000XR

[HYPERPRO 22093381 Rear Spring Lowering approx. 15mm S1000XR Suspension]
■Rear Spring
A lowering spring unique to Hyperpro that lowers the vehicle height by changing the spring rate and oil level adjustment without significantly changing the free length of the spring.
Enjoy the smooth ride of the constant rising rate, which softly absorbs shocks and firmly supports the vehicle at its deepest point.
Front springs come with the necessary amount of fork oil.
Compatible models
BMW S1000XR '15-'19 (ESA)
Specifications
Lowering: approx. 15mm
Spring material number: 1305
Preload adjustment: ESA
Sag value: 40mm
Compression adjustment: ESA
Rebound adjustment: ESA
*When using the side stand, park on a flat surface with the transmission in first gear. (The vehicle will be more upright than normal due to the lowering.)
*After installation, the vehicle balance will change significantly. Always adjust the front and rear settings before riding.
*Lowering parts are designated components, so no structural modification procedures are required.
*For lowering of 30mm or more, a shorter side stand may be required depending on the vehicle condition. For models with preload adjustment, adjust the setting while ensuring the side stand can be used with the lowered height.
*The image is for illustrative purposes only, and the design and specifications of the products shown are subject to change without notice. Please understand.