Front Springs: Lowers about 25mm R nineT

【HYPERPRO 22093390 Front Spring Lowdown approx. 25mm R nineT Suspension Fork Spring】
■Front Spring
A lowdown spring unique to Hyperpro, which lowers the vehicle height by changing the rate and adjusting the oil level without significantly changing the free length of the spring.
Enjoy the smooth ride of the constant rising rate, which absorbs impacts flexibly and provides firm support deep in the stroke.
The front spring comes with the necessary amount of fork oil.
Compatible models
BMW R nineT SCRAMBLER '16～'19
BMW R nineT Urban G/S '17～'19
Specifications
Lowdown: approx. 25mm
Spring part number: 1514
Fork oil grade/oil level: SAE15/150mm
Preload adjustment: No adjustment
Sag value: 45mm
Compression adjustment: No adjustment
Rebound adjustment: No adjustment
Setting remarks: Fork protrusion amount 10mm (stock 5mm) / Remove the stock 100mm spacer and install.
*Please set the fork protrusion amount to 10mm. (Stock 5mm)
*When using the side stand, please park on a flat surface with the bike in first gear. (The vehicle will be more upright than normal due to the lowdown)
*The vehicle balance will change significantly after installation. Please adjust the front and rear settings before riding.
*Lowdown parts are considered designated parts, so structural modification procedures are not required.
*For lowdowns of 30mm or more, a short side stand may be necessary depending on the vehicle condition. For models with adjustable preload, please adjust the lowdown amount so that the side stand can be used.
*Images are for illustration purposes only, and the design and specifications of the products shown are subject to change without notice. Please understand.