Rear springs, approximately 25mm lowering for R nineT

【HYPERPRO 22093391 Rear Spring Lowering approx. 25mm R nineT Suspension】
■Rear Spring
Hyperpro's unique lowering spring that lowers the ride height by changing the spring rate and oil level without significantly altering the free length of the spring.
Enjoy the smooth ride of the constant rising rate, which softly absorbs shocks and firmly supports the bike deep in the stroke.
The front spring includes the necessary amount of fork oil.
Compatible models
BMW R nineT SCRAMBLER '16-'19
BMW R nineT Urban G/S '17-'19
Specifications
Lowering: approx. 25mm
Spring material number: 1295
Preload adjustment: 3mm
Sag value: 33mm
Compression adjustment: None
Rebound adjustment: 1 turn out
*When using the side stand, park on a flat surface with the bike in first gear. (Due to the lowering, the bike will be more upright than with the normal suspension.)
*The vehicle balance will change significantly after installation. Always adjust the front and rear settings before riding.
*Lowering parts are designated parts, so no structural modification procedures are required.
*For lowering of 30mm or more, a shorter side stand may be required depending on the vehicle's condition. For models with adjustable preload, please adjust the setting to a lowering amount where the side stand can be used.
*The image is for illustration purposes only, and the design and specifications of the products shown are subject to change without notice. Please be aware of this.