Front springs, approximately 30mm lowering, Vitpilen 401

【HYPERPRO 22093690 Front Spring Lowering approx. 30mm VITPILEN401 Suspension Fork Spring】
■Front Spring
Hyperpro's unique lowering springs reduce vehicle height by changing the spring rate and adjusting the oil level, without significantly altering the free length of the spring.
Enjoy the smooth ride of our constant rising rate, which absorbs impacts flexibly and provides firm support deeper in the stroke.
Front springs come with the necessary amount of fork oil.
Compatible models
HUSQVARNA VITPILEN401 '18-'19
Specifications
Lowering: approx. 30mm
Spring part number: 1515
Fork oil viscosity/oil level: SAE10/90mm
Preload adjustment: Not adjustable
Sag value: 55mm
Compression adjustment: Not adjustable
Rebound adjustment: Not adjustable
Setting remarks: Fork protrusion 15mm.
*When using the side stand, park on a flat surface in first gear. (The bike will be more upright than normal due to lowering.)
*After installation, the vehicle balance will change significantly. Always adjust the front and rear settings before riding.
*Lowering parts are designated components, so no structural modification procedures are required.
*For lowering of 30mm or more, a short side stand may be required depending on the vehicle condition. For models with adjustable preload, set the ride height while adjusting the preload to a level where the side stand can be used.
*Images are for illustration purposes only. The design and specifications of the products shown are subject to change without notice. Thank you for your understanding.