Rear spring lowering approx. 40mm F850GS

【HYPERPRO Hyperpro 22093801 Rear Spring Lowdown approx. 40mm F850GS Suspension】
■Rear Spring
This lowdown spring, unique to Hyperpro, lowers the ride height by changing the spring rate and oil level adjustment without significantly changing the free length of the spring.
Enjoy the smooth ride of the constant rising rate, which absorbs impacts flexibly and firmly supports the bike at the end of its travel.
Compatible models
BMW F850GS '18-'22 (ESA compatible/genuine lowdown suspension not compatible)
Specifications
Lowdown: Approx. 40mm
Spring part number: 1743
Preload adjustment: ESA/weakest
Sag value: 70mm
Compression adjustment: None
Rebound adjustment: ESA/0.75 turns back.
*Cannot be installed on genuine lowdown suspensions.
*When using the side stand, park the bike on a flat surface with the gear in first position. (Due to the lowdown, the bike will be more upright than normal)
*The vehicle balance changes significantly after installation. Always adjust the front and rear settings before riding.
*Lowdown parts are considered designated parts, so no structural modification procedures are required.
*For lowdowns of 30mm or more, a short side stand may be required depending on the vehicle condition. For models with adjustable preload, set the lowdown amount so that the side stand can be used.
*The image is for illustration purposes only, and the design and specifications of the products shown may change without notice. Please be aware of this.