Front Springs: Lowers about 25mm R nineT

【HYPERPRO 22094070 Front Spring Lowering Approx. 25mm for R nineT Suspension Fork Spring】
■Front Spring
These are Hyperpro's unique lowering springs, which lower the ride height by changing the spring rate and adjusting the oil level, without significantly altering the free length of the spring.
Enjoy the smooth ride of Hyperpro's constant rising rate springs, which absorb impacts flexibly and firmly withstand deeper compression.
The front springs come with the necessary amount of fork oil.
Compatible models
BMW R nineT '17-'20
Specifications
Lowering: Approx. 25mm
Spring part number: 1621
Fork oil weight/oil level: SAE10/110mm
Preload adjustment: Weakest
Sag value: 55mm
Compression adjustment: POS. 7
Rebound adjustment: POS. 8.
*When using the side stand, park the motorcycle on a flat surface with the transmission in first gear. (Due to the lowering, the motorcycle will stand more upright than with the stock setup.)
*After installation, the vehicle's balance will change significantly. Always adjust the front and rear settings before riding.
*Lowering parts are designated components, so structural modification procedures are not required.
*For lowering of 30mm or more, a shorter side stand may be required depending on the vehicle's condition. For models with preload adjustment, please adjust the setting to a lowering amount that allows the side stand to be used.
*Images are for illustration purposes only. The design and specifications of the products shown may change without prior notice. Thank you for your understanding.