Front spring, approximately 35mm lowered, 690 Enduro R

【HYPERPRO 22094140 Front Spring Lowering approximately 35mm 690 Enduro R Suspension Fork Spring】
■Front Spring
Hyperpro's unique lowering springs reduce vehicle height through rate changes and oil level adjustments, without significantly altering the free length of the spring.
Enjoy the smooth ride of the constant rising rate, which softly absorbs shocks and maintains stability deeper into the stroke.
The front spring comes with the required amount of fork oil.
Compatible models
KTM 690 ENDURO R (ABS) '19
KTM 690 ENDURO R '19
Specifications
Lowering: Approximately 35mm
Spring part number: 1709
Fork oil viscosity/oil level: 2X SAE7.5/120mm
Preload adjustment: No adjustment
Sag value: 41mm
Compression adjustment: 14 clicks out
Rebound adjustment: 10 clicks out
Setting notes: Fork protrusion 20mm
Included accessories: 2L oil.
*When using the side stand, park the vehicle on a flat surface in first gear. (The vehicle will stand more upright than stock due to the lowering.)
*After installation, the vehicle's balance will change significantly. Always adjust both front and rear settings before riding.
*Lowering parts are designated components, so no structural modification procedures are required.
*For lowering of 30mm or more, a shorter side stand may be required depending on the vehicle's condition. For models with preload adjustment, please set the preload while adjusting to a lowering amount where the side stand can still be used.
*The image is for illustration purposes only, and the design and specifications of the products shown may change without prior notice. Please understand.