Rear Spring Lowering approx. 30mm FTR1200

【HYPERPRO Hyperpro 22094171 Rear Spring Lowering approx. 30mm FTR1200 Suspension】
■Rear Spring
Hyperpro's unique lowering spring that lowers the ride height by changing the spring rate and adjusting the oil level without significantly changing the free length of the spring.
Enjoy the smooth ride of the constant rising rate, which flexibly absorbs shocks and firmly supports the bike at the end of its travel.
Compatible models
INDIAN FTR1200 '19 (including 1200S)
Specifications
Lowering: approx. 30mm
Spring part number: 1516
Preload adjustment: 2mm
Sag value: 60mm
Compression adjustment: 1.5 turns (S model only)
Rebound adjustment: 10-12 clicks out.
*The short side stand needs to be cut. (20mm recommended)
*When using the side stand, please park on a flat surface with the bike in first gear. (The bike will be more upright than normal due to the lowering)
*The bike's balance will change significantly after installation. Please make sure to set the front and rear suspension before riding.
*Lowering parts are designated parts, so structural modification procedures are not required.
*For lowering by more than 30mm, a short side stand may be necessary depending on the bike's condition. For models with preload adjustment, please adjust the preload to a lowering amount where the side stand can be used.
*The image is for illustrative purposes only, and the design and specifications of the products shown may be changed without notice. Please understand.