Front springs: Lowering by approx. 10mm for R nineT Pure

【HYPERPRO 22094230 Front Spring, Low-Down approx. 10mm, R nineT Pure Suspension Fork Spring】
■Front Spring
A low-down spring unique to Hyperpro, which lowers the ride height by changing the rate and adjusting the oil level without significantly altering the free length of the spring.
Enjoy the smooth ride of the constant rising rate, which absorbs impacts flexibly and holds strong at the deepest point.
The front spring comes with the necessary amount of fork oil.
Compatible Models
BMW R nineT Pure '17-'19 FACTORYLOW
Specifications
Low-down: Approx. 10mm
Spring Material Number: 1566
Fork Oil Viscosity/Oil Level: SAE15/140mm
Preload Adjustment: No adjustment
Sag Value: 33mm
Compression Adjustment: No adjustment
Rebound Adjustment: No adjustment
Setting Notes: Fork Extension Amount 0mm.
*When using the side stand, park on a flat surface in first gear. (Due to the low-down, the bike will stand more upright than with the normal setup.)
*After installation, the vehicle's balance will change significantly. Always adjust the front and rear settings before riding.
*Low-down parts are considered designated parts, so no structural modification procedures are required.
*For low-downs of 30mm or more, a short side stand may be necessary depending on the vehicle's condition. For models with adjustable preload, set the preload while adjusting the low-down amount so that the side stand can be used.
*The image is for illustration purposes only, and the design and specifications of the products shown are subject to change without notice. Please be aware of this.