Rear springs, approx. 30mm lowering for 1090 Adventure R

【HYPERPRO Hyperpro 22094251 Rear Spring Lowdown Approx. 30mm 1090 Adventure R Suspension】
■Rear Spring
These Hyperpro lowdown springs lower the ride height by changing the spring rate and adjusting the oil level, without significantly altering the free length of the spring.
Enjoy the smooth ride of our constant rising rate, which flexibly absorbs shocks and firmly supports the bike deeper in its travel.
Compatible models
KTM 1090 ADVENTURE R '17-'19
Specifications
Lowdown: Approx. 30mm
Spring part number: 1591
Preload adjustment: Hydraulic
Sag value: 50mm
Compression adjustment: High speed 1.5 turns / Low speed 15 clicks
Rebound adjustment: 15 clicks out.
*When using the side stand, park the bike on a flat surface in first gear. (The bike will be more upright than normal due to the lowdown setting.)
*After installation, the vehicle's balance will change significantly. Always adjust the front and rear settings before riding.
*Lowdown parts are considered designated components, so no structural modification procedures are required.
*For lowdowns of 30mm or more, a short side stand may be necessary depending on the vehicle's condition. For models with adjustable preload, adjust the setting while ensuring the side stand can still be used at the reduced height.
*The image is for illustration purposes only, and the design and specifications of the product shown may change without notice. Please be aware.