Front spring Lowering approx. 20mm R1250GS

[HYPERPRO 22094280 Front Spring, Low Down approx. 20mm R1250GS Suspension Fork Spring]
■Front Spring
Hyperpro's unique low-down spring lowers the vehicle height by changing the rate and adjusting the oil level, without significantly changing the free length of the spring.
Enjoy the smooth ride of the constant rising rate, which absorbs impacts flexibly and provides firm support when pushed.
The front spring comes with the necessary amount of fork oil.
Compatible models
BMW R1250GS '18-'22 (ESA)
Specifications
Low down: approx. 20mm
Spring part number: 1501
Fork oil viscosity/oil level: NO OIL /
Preload adjustment: Middle position
Sag value: 55mm
Compression adjustment: ESA
Rebound adjustment: ESA
Setting notes: Set the preload clip ring to the center.
*When using the side stand, park on a flat surface in first gear. (Due to the low-down, the vehicle will be more upright than normal)
*After installation, the vehicle balance changes significantly. Be sure to set up the front and rear before riding.
*Low-down parts are considered designated parts, so no structural modification procedures are required.
*For low-downs of 30mm or more, a short side stand may be required depending on the vehicle condition. For models with adjustable preload, adjust the low-down amount so that the side stand can be used while performing the settings.
*The image is for illustration purposes only, and the design and specifications of the products shown are subject to change without notice. Please be aware of this.