Rear spring lowering approx. 20mm R1250GS

【HYPERPRO Hyperpro 22094281 Rear Spring Lowdown Approx. 20mm R1250GS Suspension】
■Rear Spring
Hyperpro's unique lowdown springs, which lower the vehicle height by changing the spring rate and oil level without significantly altering the spring's free length.
Enjoy the smooth ride of Constant Rising Rate, which softly absorbs shocks and firmly supports the bike deep in its stroke.
Compatible Models
BMW R1250GS '18-'22 (ESA)
Specifications
Lowdown: Approx. 20mm
Spring Part Number: 1588
Preload Adjustment: ESA
Sag Value: 50mm
Compression Adjustment: ESA
Rebound Adjustment: ESA
Setting Notes: Install with the tapered end facing up.
*When using the side stand, park on a flat surface with the bike in first gear. (The bike will be more upright than normal due to the lowdown.)
*After installation, the vehicle balance will change significantly. Always perform front and rear adjustments before riding.
*Lowdown parts are designated parts, so no structural modification procedures are required.
*For lowdowns of 30mm or more, a shorter side stand may be required depending on the vehicle's condition. For models with preload adjustment, adjust the preload to a lowdown amount that allows the side stand to be used.
*The image is for illustrative purposes only, and the design and specifications of the products shown are subject to change without notice. Thank you for your understanding.