Front Springs Lowering approximately 20mm for R1250GS Adventure

[HYPERPRO 22094350 Front Spring Lowered by Approx. 20mm R1250GS Adventure Suspension Fork Spring]
■Front Spring
Hyperpro's unique lowering springs, which lower the vehicle height by changing the spring rate and oil level adjustment without significantly altering the free length of the spring.
Enjoy a smooth ride with constant rising rate that flexibly absorbs shocks and firmly supports at the end of the stroke.
The front spring comes with the necessary amount of fork oil.
Compatible models
BMW R1250GS ADVENTURE '18-'22 (ESA)
Specifications
Lowering: Approx. 20mm
Spring part number: 1501
Fork oil viscosity/oil level: NO OIL /
Preload adjustment: Middle position
Sag value: 55mm
Compression adjustment: ESA
Rebound adjustment: ESA
Setting notes: Set the preload clip ring to the center.
*When using the side stand, park on a flat surface in first gear. (Due to the lowering, the vehicle will be more upright than with the normal suspension.)
*After installation, the vehicle's balance will change significantly. Always adjust the front and rear settings before riding.
*Lowering parts are designated components, so no structural modification procedures are required.
*For lowering of 30mm or more, a short side stand may be required depending on the vehicle's condition. For models with adjustable preload, please adjust the setting while ensuring that the side stand can be used with the lowered height.
*Images are for illustration purposes only, and the design and specifications of the products shown are subject to change without notice. Thank you for your understanding.