Front springs for approximately 25mm lower R1250GS

【HYPERPRO 22094370 Front Spring Lowering approx. 25mm R1250GS Suspension Fork Spring】
■Front Spring
Hyperpro's unique lowering spring that lowers the ride height by changing the spring rate and oil level adjustment without significantly changing the free length of the spring.
Enjoy the smooth ride of the constant rising rate, which absorbs shocks flexibly and provides firm support when pushed hard.
The front spring comes with the necessary amount of fork oil.
Compatible models
BMW R1250GS ADVENTURE '18-'22 (ESA/genuine lowdown model)
Specifications
Lowering: approx. 25mm
Spring part number: 1501
Fork oil grade/oil level: NO OIL/-
Preload adjustment: Mid-position
Sag value: 55mm
Compression adjustment: ESA
Rebound adjustment: ESA
Setting notes: Set the preload clip ring to the center.
*When using the side stand, park the motorcycle in a flat place with the gear in first position. (Due to the lowering, the motorcycle will be more upright than normal.)
*The vehicle balance changes significantly after installation. Always perform front and rear adjustments before riding.
*Lowering parts are designated components, so no structural modification procedures are required.
*For lowering by 30mm or more, a short side stand may be required depending on the vehicle condition. For models with preload adjustment, adjust the preload to a lowering amount where the side stand can be used.
*The image is for illustrative purposes only, and the design and specifications of the products shown may change without prior notice. Please understand.