Front springs for approximately 25mm lower R1250GS

【HYPERPRO Hyperpro 22094390 Front Spring Lowdown Approx. 25mm R1250GS Suspension Fork Spring】
■Front Spring
Hyperpro's unique lowdown spring, which lowers the ride height by changing the rate and adjusting the oil level without significantly altering the free length of the spring.
Enjoy the smooth ride of the constant rising rate, which flexibly absorbs shocks and provides firm support deeper into the travel.
The front spring comes with the necessary amount of fork oil.
Compatible models
BMW R1250GS '18-'22 (Genuine lowdown model)
Specifications
Lowdown: Approx. 25mm
Spring part number: 1501
Fork oil viscosity/oil level: NO OIL/-
Preload adjustment: Middle position
Sag value: 55mm
Compression adjustment: ESA
Rebound adjustment: ESA
Setting notes: Set the preload clip ring to the center.
*When using the side stand, park on a flat surface with the bike in first gear. (Due to the lowdown, the bike will be more upright than normal.)
*After installation, the balance of the vehicle will change significantly. Always adjust the front and rear settings before riding.
*Lowdown parts are considered designated parts, so no structural modification procedures are required.
*For lowdowns of 30mm or more, a short side stand may be required depending on the vehicle's condition. For models with preload adjustment, please adjust the setting to a lowdown amount that allows the side stand to be used.
*The image is for illustration purposes only, and the design and specifications of the products shown may change without prior notice. Please understand.