Rear Spring Lowers Approx. 15mm Roadmaster Chieftain

【HYPERPRO 22094601 Rear Spring Lowering approx. 15mm for Roadmaster Chieftain Suspension】
■Rear Spring
A lowering spring unique to Hyperpro, which lowers the ride height by changing the spring rate and adjusting the oil level, without significantly altering the free length of the spring.
Enjoy the smooth ride of the constant rising rate, which flexibly absorbs shocks and firmly supports the bike at its limits.
The front spring comes with the necessary amount of fork oil.
Compatible Models
INDIAN ROADMASTER '15-'20 (Pressurized Shock)
INDIAN CHIEFTAIN '15-'20 (Pressurized Shock)
Specifications
Lowering: Approx. 15mm
Spring Material Number: 1617
Preload Adjustment: 5mm (without air pressurization)
Sag Value: 40mm
Compression Adjustment: None
Rebound Adjustment: None
*When using the side stand, stop on a flat surface with the bike in first gear. (Due to the lowering, the bike will be more upright than with the normal suspension)
*The vehicle balance will change significantly after installation. Always adjust the front and rear settings before riding.
*Lowering parts are considered specified components, so no structural modification procedures are required.
*For lowering of 30mm or more, a short side stand may be required depending on the vehicle's condition. For models with preload adjustment, please set the preload while adjusting it to a lowering amount that allows the side stand to be used.
*The image is for illustration purposes only, and the design and specifications of the products shown may change without notice. Thank you for your understanding.