Front springs, approximately 30mm lowering F900XR

【HYPERPRO Hyperpro 22094610 Front Spring Lowered Approx. 30mm F900XR Suspension Fork Spring】
■Front Spring
Hyperpro's unique lowered spring, which lowers the ride height by changing the rate and adjusting the oil level without significantly changing the free length of the spring.
Enjoy the smooth ride of the constant rising rate, which flexibly absorbs shocks and provides firm support.
The front spring comes with the necessary amount of fork oil.
Compatible models
BMW F900XR '20 (excluding ESA/genuine lowered vehicles)
Specifications
Lowering: Approx. 30mm
Spring part number: 1793
Fork oil grade/oil level: 2X SAE15/170mm
Preload adjustment: None
Sag value: 50-55mm
Compression adjustment: None
Rebound adjustment: None
Setting remarks: Protrusion amount 10mm / Install with the tapered end up / Spring 20mm shorter than genuine / Left spring is secured with a clip.
*When using the side stand, park on a flat surface in first gear. (The vehicle will be more upright than normal due to the lowering)
*The vehicle balance will change significantly after installation. Always adjust the front and rear settings before riding.
*Lowering parts are designated components, so no structural modification procedures are required.
*For lowering by more than 30mm, a short side stand may be required depending on the vehicle condition. For models with adjustable preload, set the lowering amount to allow the use of the side stand.
*Images are for illustration purposes only, and the design and specifications of the products shown may change without notice. Please be aware of this.