Front spring, approx. 25mm lower, F900R

【HYPERPRO Hyperpro 22094650 Front Spring Lowering approx. 25mm F900R Suspension Fork Spring】
■Front Spring
A lowering spring unique to Hyperpro, which lowers the ride height by changing the rate and adjusting the oil level without significantly changing the free length of the spring.
Enjoy the smooth ride of the constant rising rate, which absorbs impacts flexibly and holds strong at the deepest point.
The front spring comes with the necessary amount of fork oil.
Compatible models
BMW F900R '20-'22 (without ESA)
Specifications
Lowering: approx. 25mm
Spring part number: 1822
Fork oil viscosity/oil level: SAE15/150mm
Preload adjustment: No adjustment
Sag value: 45mm
Compression adjustment: No adjustment
Rebound adjustment: No adjustment.
*When using the side stand, park on a flat surface in first gear. (The vehicle will be more upright than normal due to the lowering.)
*The vehicle balance will change significantly after installation. Always adjust the front and rear settings before riding.
*Lowering parts are designated parts, so structural modification procedures are not required.
*For lowering by 30mm or more, a shorter side stand may be required depending on the vehicle condition. For models with preload adjustment, adjust the preload to a lowering amount where the side stand can be used.
*Images are for illustration purposes only, and the design and specifications of the products shown are subject to change without prior notice. Thank you for your understanding.