Rear spring, lowers by approximately 25mm, 1290 Super Duke R

[HYPERPRO 22094711 Rear Spring Lowering approx. 25mm 1290 Super Duke R Suspension]
■Rear Spring
Hyperpro's unique lowering springs lower the vehicle height by changing the spring rate and adjusting the oil level, without significantly altering the free length of the spring.
Enjoy the smooth ride of the constant rising rate, which absorbs impacts flexibly and provides strong support deeper into the stroke.
Compatible models
KTM 1290 SUPERDUKE R '20
Specifications
Lowering: approx. 25mm
Spring part number: 1845
Preload adjustment: Weakest
Sag value: 40-45mm
Compression adjustment: Low speed / 8 clicks out, High speed / 1.5 turns out
Rebound adjustment: 15 clicks out.
*When using the side stand, park on a flat surface with the bike in first gear. (Due to the lowering, the bike will be more upright than with the stock setup.)
*The vehicle's balance will change significantly after installation. Always perform front and rear adjustments before riding.
*Lowering parts are designated components, so structural modification procedures are not required.
*For lowering of 30mm or more, a shorter side stand may be required depending on the vehicle's condition. For models with adjustable preload, please adjust the setting to a lowering amount where the side stand can be used.
*The image is for illustration purposes only, and the design and specifications of the products shown may change without prior notice. Please understand.