Front springs, low down approx. 30mm for 250 Duke

【HYPERPRO Hyperpro 22095020 Front Spring, Low Down approx. 30mm, 250 Duke Suspension Fork Spring】
■Front Spring
This is a low-down spring unique to Hyperpro, which lowers the vehicle height by changing the rate and adjusting the oil level without significantly altering the free length of the spring.
Enjoy the smooth ride of the Constant Rising Rate, which flexibly absorbs shocks and maintains stability deeper into the stroke.
The front spring comes with the necessary amount of fork oil.
Compatible models
KTM 250 DUKE '17-'18
Specifications
Low down: Approx. 30mm
Spring material number: 1515
Fork oil grade/level: SAE7.5/90mm
Preload adjustment: Not adjustable
Sag value: 55mm
Compression adjustment: Not adjustable
Rebound adjustment: Not adjustable
Setting remarks: Fork protrusion amount 15mm.
*When using the side stand, park on a flat surface in first gear. (Due to the low-down, the vehicle will stand more upright than with the stock setup)
*Vehicle balance will change significantly after installation. Always adjust the front and rear settings before riding.
*Low-down parts are considered designated components, so no structural modification procedures are required.
*For low-downs of 30mm or more, a short side stand may be necessary depending on the vehicle's condition. For models with adjustable preload, adjust the low-down amount so that the side stand can be used while performing the settings.
*Images are for illustration purposes only, and the design and specifications of the products shown may change without prior notice. Please be aware.