Lowering Link Kit Pull Rod -35mm TDM900

【HYPERPRO HyperPro 22339002 Lowering Link Kit Pull Rod -35mm TDM900 Ride Height Adjustment】
■Lowering Spring
A plate that lowers the ride height by changing the position of the normal suspension by replacing the rear suspension link.
It is also possible to replace the spring with a HyperPro one at the same time.
Kits with optimal shapes are set for each vehicle model. In addition, for some vehicle models, a stroke limiter is included to prevent bottoming out during full stroke due to lowering.
Compatible models
YAMAHA TDM900 '02-'08
Specifications
Stroke limiter included: No
Stock side stand angle: 11°
Side stand angle after kit installation: 5°
Side stand required cutting amount: 25mm
Maximum front fork protrusion: 30mm
Type: Pull rod
Lowering amount: 35mm.
*The lean of the stand in its stock condition varies depending on the vehicle's characteristics. Please prepare a short stand by the stated numerical value separately, or cut the stock stand by the numerical value.
*Front suspension setting is recommended to achieve proper vehicle balance.
*Lowering parts are designated components, so no structural modification procedures are required.
*Images are for illustration purposes only, and the design and specifications of the products shown are subject to change without notice. Please be aware.