Lowering Link Kit Approx. -40mm Pull Rod YZF-R6

[HYPERPRO 22339004 Lowering Link Kit Approx. -40mm Pull Rod YZF-R6 Rear Shock Suspension]
■Lowering Spring
This plate lowers the vehicle height by changing the position of the normal suspension by replacing the rear suspension link.
It is also possible to replace the spring with a Hyperpro spring at the same time.
Kits with optimal shapes are set for each vehicle model. In addition, depending on the vehicle model, a stroke limiter is included to prevent bumping (bottoming out) during full stroke due to lowering.
Compatible models
YAMAHA YZF-R6 '06-'15
Specifications
Stroke limiter included: Included
Lowering amount: 40mm
Stock side stand angle: 9°
Side stand angle after kit installation: 1°
Side stand required cutting amount: 30mm
Front fork maximum protrusion amount: 20mm
Type: Pull rod.
*Depending on vehicle characteristics, the lean of the stand in its stock condition varies. Please purchase a short stand of the specified length separately or cut the stock stand by the specified length. (25mm cut recommended)
*Front suspension settings are recommended to achieve vehicle balance.
*Lowering parts are designated parts, so no structural modification procedures are required.
*Images are for illustration purposes only, and the design and specifications of the products listed are subject to change without notice. Please understand.