Lowering Link Kit, approx. -25mm, Pull Rod, Z1000

【HYPERPRO Hyperpro 22379002 Lowering Link Kit Approx. -25mm Pull Rod Z1000 Rear Shock Suspension】
■Lowering Spring
A plate that lowers the ride height by changing the position of the normal suspension through replacement of the rear suspension link.
It is also possible to replace the spring with a Hyperpro spring at the same time.
Kits are set with optimal shapes for each vehicle model. In addition, for some vehicle models, a stroke limiter is included to prevent bumping (bottoming out) during full stroke due to lowering.
Compatible models
KAWASAKI Z1000 '07-'09
KAWASAKI Z1000 (ABS) '07-'09
Specifications
Stroke limiter included: No
Lowering amount: 25mm
OEM side stand angle: 11°
Side stand angle after kit installation: 6°
Required side stand cut amount: 15mm
Maximum front fork protrusion: 15mm
Type: Pull rod.
*Depending on the vehicle characteristics, the inclination of the stand in the OEM condition varies. Please prepare a short stand by the specified amount separately, or cut the OEM stand by the specified amount. (25mm cut recommended)
*Front setting is recommended to achieve vehicle balance.
*Since lowering parts are considered designated parts, no structural modification procedure is required.
*Images are for illustration purposes only, and the design and specifications of the products shown may change without notice. Please understand.