Brake Master Cylinder VRC Clamp Reverse Thread Mirror Holder Lever Ratio 18-16mm φ14 Standard Lever

[Galespeed VRC14X-17BG Brake Master Cylinder VRC Clamp Reverse Thread Mirror Holder Lever Ratio 18-16mm φ14 Standard Lever]
■Brake Master φ14
・A forged radial master cylinder equipped with a uniquely developed variable ratio lever. The fulcrum to operating point of the lever can be adjusted in 0.25mm increments up to 2mm, allowing for a more optimal brake feel, which was previously dependent on the caliper combination.
・Additionally, three types of clamps (four for brakes) and two sizes of levers are available to suit the vehicle and individual rider's preferences. By making all possible combinations standard equipment, the hassle of purchasing optional parts is reduced.
●Only glycol ether-based brake/clutch fluid can be used. Do not use silicone-based or mineral-based brake fluids. (This may cause malfunction or fluid leakage.)
■Bolt Pitch: P1.00
[Round Lever]
・Features a round-shaped lever that allows for a smooth pull with the finger.
●Photos may differ from the actual product.
●Only glycol ether-based brake/clutch fluid can be used. Do not use silicone-based or mineral-based brake fluids, as they may cause malfunction or fluid leakage.
●Bolt Pitch: P1.00
●This price is for the master cylinder main unit only.
●Ensure proper torque management during installation. The mounting torque for the M6 clamp bolt is 12N·m.
●If the measurement point for the vehicle height stated on the vehicle inspection certificate is the master cylinder (mainly the master cup), changes exceeding ±40mm require a structural modification procedure.
●The main body and clamp parts are treated with highly durable "hard anodizing." Unlike general colored anodizing, it features a natural color finish. Therefore, the color tone may vary from the posted photos depending on various conditions. Returns or exchanges due to color tone are not accepted. Please be aware.
Specifications:
・Cylinder Diameter: φ14
・Fulcrum to Operating Point: 18-16mm (in 0.25mm increments)
・Clamp Type: Reverse Thread Mirror Holder
・Lever Size: Standard (Round Type)
*Images are for illustration purposes only, and the design and specifications of the products shown are subject to change without notice. Please be aware.