Brake Master Cylinder VRC Clamp Reverse Thread Mirror Holder Lever Ratio 18-16mm φ14 Short Lever

[GALE SPEED VRC14X-17BGS Brake Master Cylinder VRC Clamp Reverse Thread Mirror Holder Lever Ratio 18-16mm φ14 Short Lever]
■Brake Master φ14
・A forged radial master cylinder equipped with a uniquely developed variable ratio lever. The fulcrum-to-point of action of the lever can be adjusted in 0.25mm increments up to a maximum of 2mm, allowing the brake feel, which previously depended on the combination with the caliper, to be brought closer to an optimal state.
・Additionally, to accommodate the vehicle and individual rider preferences, three types of clamps (four types for brakes) and two lever sizes are available. By making all combination patterns standard equipment, the hassle of purchasing options is reduced.
●Only glycol ether-based brake/clutch fluid can be used. Do not use silicone-based or mineral-based brake fluid. (This can cause malfunction or fluid leakage)
■Bolt pitch: P1.00
[Round lever]
・Features a round-shaped lever that allows for a smooth pull with the finger.
●Photos may differ from the actual product.
●Only glycol ether-based brake/clutch fluid can be used. Do not use silicone-based or mineral-based brake fluid, as it can cause malfunction or fluid leakage.
●Bolt pitch: P1.00
●This is the price for the master cylinder body only.
●When installing, ensure proper torque management. The tightening torque for the M6 clamp bolt is 12N·m.
●If the measuring point for the vehicle height recorded on the vehicle inspection certificate is the master cylinder (mainly the master cup), a change exceeding ±40mm requires a structural modification procedure.
●The main body and clamp parts are treated with highly durable "hard anodizing." Unlike general colored anodizing, it features a finish with natural color development. Therefore, the color tone may change from the posted photos due to various conditions. Returns or exchanges based on color tone are not accepted. Please be aware of this.
Specifications:
・Cylinder diameter: φ14
・Fulcrum-to-point of action: 18-16mm (in 0.25mm increments)
・Clamp type: Reverse thread mirror holder
・Lever size: Short (round type)
Notes on images:
*The photo shows a standard lever.
*The image is for illustration purposes, and the design and specifications of the products shown may change without notice. Please be aware of this.